Running your system
How to read an air conditioner energy rating label
Make sense of air conditioner stars, climate zones, capacity and annual energy use so you can compare suitable models with confidence.

When two air conditioner quotes arrive with different star ratings, it can be hard to know which will suit your family. The label helps you compare efficiency once the right size is chosen. Start with the same climate zone and compare heating with heating, or cooling with cooling. Then look at the annual electricity figures to understand what sits behind those stars.
What does the energy label tell you?
The Zoned Energy Rating Label is the coloured label with a map and rows of stars. “Zoned” means it gives different ratings for hot, average and cold climates. Efficiency means how much heating or cooling you get for the electricity used. The label helps you compare suitable models under the same test assumptions, rather than relying on a broad “energy efficient” claim.
You do not need to understand every specification before you ask for help. Keep the labels with your quotes, including the indoor and outdoor model numbers. A wall-mounted split system has a unit inside and one outside; the label needs to match the combination being offered.
Why should you check the size before the stars?
Capacity is the amount of heating or cooling a system can deliver, measured in kilowatts, written as kW. It describes the job the unit can do. A bedroom and a large living area may need different capacities, so their star ratings are not a fair comparison.
Capacity is different from electrical input: the electricity the system draws to do that job. Air conditioners move heat rather than turning every unit of electricity directly into heating or cooling. That is why a unit described as “5 kW cooling” does not necessarily draw 5 kW of electricity.
If you are unsure what size the room needs, start with our guide to choosing air conditioner size. Once suitable capacities and features have been identified, the label becomes a useful way to narrow the choice.

Which climate row should you read?
Use the label map, or enter your postcode in the Australian Government Energy Rating Calculator, to identify the climate zone for your address. A very hot afternoon does not, by itself, mean you should use the hot-zone row. The zones describe weather over a season, not today’s temperature.
This is worth checking when comparing a Penrith home with a property higher in the Blue Mountains. Keep to the same climate row for both models so you are comparing them on equal terms.
Do cooling and heating have separate stars?
Yes. Cooling is shown in blue and heating in red. More stars indicate better efficiency when you compare models of similar capacity, type and features in the same climate zone.
Reverse cycle means the same air conditioner can heat as well as cool. If you expect to warm the home on winter mornings, check the heating stars too. A strong cooling rating does not tell you everything about winter performance.

What does the annual kWh figure mean?
A kilowatt-hour, written as kWh, measures an amount of electricity used over time. The label estimates annual kWh separately for heating and cooling in each climate zone. For comparable models, a lower figure means less electricity under the label’s assumptions.
For example, imagine two suitable models with similar capacities and features. If one has a lower annual cooling figure in your climate row, that is useful evidence when summer cooling is your main concern. It does not promise that your household will use exactly that amount: your hours, temperature settings and home will differ from the test assumptions.
You can multiply annual kWh by your electricity usage price for a rough dollar comparison. Use both heating and cooling figures if you plan to use both modes. Our running costs guide explains the calculation and why a household bill can differ.
What else should you check before choosing?
The label also shows operating noise in decibels, written as dB(A), with separate indoor and outdoor figures for split systems. These are published noise ratings, not a promise about what you will hear in a particular bedroom. Ask about the proposed position as well as the number, especially near sleeping areas or a neighbour’s window.
Ducted systems, which carry air to rooms through passages called ducts, do not always have the same displayed label as a wall split. Label display rules vary by system type and size. If a ducted quote has no star label, ask for the exact model’s efficiency information and an explanation of how it has been compared.
How can we help you compare two quotes?
Send us the quotes or clear photos of the labels, along with your suburb, the rooms you want comfortable and whether you need winter heating. We can talk through which figures are comparable and what still needs checking in the home. Our split system installation page explains the next step if you are considering a wall-mounted unit.
The label is one part of the decision. Use it alongside the room size, layout, controls and what each installation quote includes, so the model you choose suits everyday life as well as looking good on paper.
Sources and further reading
Research checked 5 October 2026. For operation, maintenance and installation requirements, use the instructions for the exact equipment in your home.
Want a hand with this?
Got two model numbers on your shortlist? Ask us to compare the right capacity and efficiency figures.
Ask Caleb ↗


